When It's Done Right ... It's Golden!

The most advanced boat lifts in the world

  English Swedish Norway U.K. Spanish Dutch Finland Italian French German
Why Buy Direct?

Golden Mfg., Inc.
17611 East Street
North Fort Myers, FL 33917
Voice: 239.337.4141
Fax: 239.337.4482
Toll Free 888.909.5438 (LIFT)
sales@goldenboatlifts.com
 

Boat Lift Drives from Golden Manufacturing

E-Drive

The Golden E-Drive is our premier boat lift drive, providing maintenance-free service in a light-weight and corrosion-resistant housing.

Flachplattenlifts

Alle Flachplattenlifts arbeiten mit demselben bewährten und leistungsstarken Schneckenradantrieb, seit vielen Jahren das Rückgrad der Industrie. Sie sind für Lifts bis 54,000# erhältlich.

The E-Drive

Flachplattenlifts

E-Drive

General Description

The AMS reducer is a double-reduction worm gear reducer contained in a single housing. It was designed specifically for a boatlift application. The input is a NEMA 56C to allow mounting a standard electric motor directly onto the reducer. The output is a hollow shaft design that is sized to accommodate a standard 2-inch pipe. The connection to the pipe utilizes the cross bolt identical to the current Flat Plate design. This design provides maintenance-free service without grease lubrication intervals or belt drive adjustments.

Housing

The housing is a cast-aluminum for light weight and corrosion resistance in salt water and humid environments. The housing is designed to provide separate lubrication reservoirs for the high-speed and low-speed gear sets to ensure proper lubrication without having to overfill. The housing is non-vented to prevent buildup of condensation inside the reducer in humid environments.
 

Gearing

The high-speed gear set is a 5:1 for high efficiency. It utilizes a production gear set from an industrial product line designed to AGMA specifications. The worm is made from a heat-treated alloy steel and meshes with a bronze worm gear.

The low-speed gear set is a high-ratio (96:1) designed to have an extremely low helix angle to prevent any possibility of backdrifting. The worm is made from heat-treated allow steel and meshes with a high-strength cast-iron worm gear. The large center distance of the low-speed gear set results in lower tooth loads for a given output torque.

 

Bearings

All shafts and gears are supported by deep grove ball bearings to provide precision positioning and high efficiency. The low-speed worm bearings are pre-lubricated and shielded to ensure proper lubrication and contain the lubricant in the high-speed cavity
 

Lubrication

The AMS reducer is factory filled with a high-quality semi-fluid grease. This high-viscosity grease is capable of handling the high shear stress inherent in worm gear products. The semi-fluid grease greatly reduces the potential for leakage.
 

Sealing

The AMS reducer utilizes spring-loaded duel-lip oil seals. The dual-lip design helps protect the sealing lip from outside contaminants and shaft corrosion. The spring-loaded sealing lips are more than capable of handling the small internal pressure that may result from the temperature changes that occur throughout the year.
 

Mounting

The AMS reducer is shaft-mounted with a flange to accommodate a torque arm connection to resist rotation of the housing. This allows a flexible mounting system so the housing can move with the shaft without binding. This eliminates the need for a precise machined mounting surface to secure the housing to the frame.

Flat Plate Drives

Click here for specifications »

Diese wirtschaftliche Lösung...

zum Heben Ihres Bootes besteht aus 6061-T6 Schiffsaluminium. Hardware und Seile sind aus qualitativ hochwertigem Edelstahl der Serie 300.

Flachplattenlifts werden in den folgenden Leistungsausführungen angeboten...

4,500#, 7,000#, 10,000#, 12,000#, 16,000#, 20,000#, 24,000#, 32,000#, 40,000# und 54,000#.
 

Für alle Flachplatten-Bootslifts

wird eine Garantie von 10 Jahren auf alle Strukturteile, von 5 Jahren auf das Antriebssystem und von 2 Jahren auf alle anderen Teile gewährt.
 
Bei der Niederprofiloption bleiben die Träger unsichtbar. Technische Zeichnungen und Haftpflichtzertifikat auf Anfrage erhältlich.
 
Wenn es richtig ist...dann ist es Golden!

 

 

E-drive
E-drive
E-drive
Flat Plate Lift Installation
Flat Plate Lift Installation
Flat Plate Lift Installation
 
For more boat lift photos, check our Photo Gallery.
 
 
 
 
 
 
 
 
 
 
 
 
Recommended Viewing
Internet Exporer 4 + | Netscape 6+
800x600 min resolution