|
 |
 |
Boathouse Side Mount Bracket: Used to mount boat lift
on the side of a piling inside a boat house. Sold in sets of 4. |
Cable Keeper: Designed to keep the cable running
in the grooves, very helpful for rough water situations.
These are optional on any 4-Post or 8-Post lift. |
|
|
|
 |
Walkway: Used to allow greater access to your boat for boarding
and cleaning. Standard width 15.5 inch, lengths up to 30 ft. |
Stairs/Steps: Made to give even greater access to your boat
and to attach to our standard walkways. Standard sizes: 2
Step, 3 Step, 4 Step (8 inch step rise). Larger sizes are available
upon request we can even add hand rails if required. |
|
|
|
 |
Stern Platform: Made to provide access to your out drives or motors. Standard length is 16'. |
Stringer Bracket: Made to attach to the top side of the lift
when the lift is sitting on the top of the piles, this allows you
to rest the span boards for the roof inside the bracket, keeping
the span boards above the drive of the lift. Sold in sets of 4. |
|
|
 |
 |
Boarding Platform: Manufactured in two standard sizes,
3' X 4' & 3' X 5'. Made to mount directly to the dock and
fill the gap between dock and boat lift for ease of boarding. |
Tide Guides: Designed to keep the cradle in place in high current
situations. Mounted on all four comers of your cradle
beams, they will follow the piles keeping the cradle in place. |
|
|
|
|
Remotes: For added convenience a remote control gives
you the ability to put the boat on the lift while you are still
in the boat. As an option you can also add auto-stop to this
remote which will stop the boat lift at the pre-set height
and depth. We offer both Gem and Tiger Shark Remotes. |
Top Beam Covers: Commonly used in a low profile
installation so that the top beam can be used as
a walk platform. Made to fit each specific lift size. |
|
|
|
 |
Rotating Steps |
Custom Walkways and Steps |
|
|
 |
 |
Floating - Hinged Access Platform |
Optional Single Angle Shallow Water Cradle |
| |
|
